Authorization

​

Introduction

​

Purpose and Scope

The Model Context Protocol provides authorization capabilities at the transport level, enabling MCP clients to make requests to restricted MCP servers on behalf of resource owners. This specification defines the authorization flow for HTTP-based transports.

​

Protocol Requirements

Authorization is OPTIONAL for MCP implementations. When supported:

• Implementations using an HTTP-based transport SHOULD conform to this specification.
• Implementations using an STDIO transport SHOULD NOT follow this specification, and instead retrieve credentials from the environment.
• Implementations using alternative transports MUST follow established security best practices for their protocol.

​

Standards Compliance

This authorization mechanism is based on established specifications listed below, but implements a selected subset of their features to ensure security and interoperability while maintaining simplicity:

• OAuth 2.1 IETF DRAFT (draft-ietf-oauth-v2-1-13)
• OAuth 2.0 Authorization Server Metadata (RFC8414)
• OAuth 2.0 Dynamic Client Registration Protocol (RFC7591)
• OAuth 2.0 Protected Resource Metadata (RFC9728)

​

Authorization Flow

​

Roles

A protected MCP server acts as an OAuth 2.1 resource server, capable of accepting and responding to protected resource requests using access tokens.

An MCP client acts as an OAuth 2.1 client, making protected resource requests on behalf of a resource owner.

The authorization server is responsible for interacting with the user (if necessary) and issuing access tokens for use at the MCP server. The implementation details of the authorization server are beyond the scope of this specification. It may be hosted with the resource server or a separate entity. The Authorization Server Discovery section specifies how an MCP server indicates the location of its corresponding authorization server to a client.

​

Overview

1. Authorization servers MUST implement OAuth 2.1 with appropriate security measures for both confidential and public clients.

2. Authorization servers and MCP clients SHOULD support the OAuth 2.0 Dynamic Client Registration Protocol (RFC7591).

3. MCP servers MUST implement OAuth 2.0 Protected Resource Metadata (RFC9728). MCP clients MUST use OAuth 2.0 Protected Resource Metadata for authorization server discovery.

4. Authorization servers MUST provide OAuth 2.0 Authorization Server Metadata (RFC8414). MCP clients MUST use the OAuth 2.0 Authorization Server Metadata.

​

Authorization Server Discovery

This section describes the mechanisms by which MCP servers advertise their associated authorization servers to MCP clients, as well as the discovery process through which MCP clients can determine authorization server endpoints and supported capabilities.

​

Authorization Server Location

MCP servers MUST implement the OAuth 2.0 Protected Resource Metadata (RFC9728) specification to indicate the locations of authorization servers. The Protected Resource Metadata document returned by the MCP server MUST include the authorization_servers field containing at least one authorization server.

The specific use of authorization_servers is beyond the scope of this specification; implementers should consult OAuth 2.0 Protected Resource Metadata (RFC9728) for guidance on implementation details.

Implementors should note that Protected Resource Metadata documents can define multiple authorization servers. The responsibility for selecting which authorization server to use lies with the MCP client, following the guidelines specified in RFC9728 Section 7.6 “Authorization Servers”.

MCP servers MUST use the HTTP header WWW-Authenticate when returning a 401 Unauthorized to indicate the location of the resource server metadata URL as described in RFC9728 Section 5.1 “WWW-Authenticate Response”.

MCP clients MUST be able to parse WWW-Authenticate headers and respond appropriately to HTTP 401 Unauthorized responses from the MCP server.

​

Server Metadata Discovery

MCP clients MUST follow the OAuth 2.0 Authorization Server Metadata RFC8414 specification to obtain the information required to interact with the authorization server.

​

Sequence Diagram

The following diagram outlines an example flow:

​

Dynamic Client Registration

MCP clients and authorization servers SHOULD support the OAuth 2.0 Dynamic Client Registration Protocol RFC7591 to allow MCP clients to obtain OAuth client IDs without user interaction. This provides a standardized way for clients to automatically register with new authorization servers, which is crucial for MCP because:

• Clients may not know all possible MCP servers and their authorization servers in advance.
• Manual registration would create friction for users.
• It enables seamless connection to new MCP servers and their authorization servers.
• Authorization servers can implement their own registration policies.

Any authorization servers that do not support Dynamic Client Registration need to provide alternative ways to obtain a client ID (and, if applicable, client credentials). For one of these authorization servers, MCP clients will have to either:

1. Hardcode a client ID (and, if applicable, client credentials) specifically for the MCP client to use when interacting with that authorization server, or
2. Present a UI to users that allows them to enter these details, after registering an OAuth client themselves (e.g., through a configuration interface hosted by the server).

​

Authorization Flow Steps

The complete Authorization flow proceeds as follows:

​

Resource Parameter Implementation

MCP clients MUST implement Resource Indicators for OAuth 2.0 as defined in RFC 8707 to explicitly specify the target resource for which the token is being requested. The resource parameter:

1. MUST be included in both authorization requests and token requests.
2. MUST identify the MCP server that the client intends to use the token with.
3. MUST use the canonical URI of the MCP server as defined in RFC 8707 Section 2.

Canonical Server URI

For the purposes of this specification, the canonical URI of an MCP server is defined as the resource identifier as specified in RFC 8707 Section 2 and aligns with the resource parameter in RFC 9728.

MCP clients SHOULD provide the most specific URI that they can for the MCP server they intend to access, following the guidance in RFC 8707. While the canonical form uses lowercase scheme and host components, implementations SHOULD accept uppercase scheme and host components for robustness and interoperability.

Examples of valid canonical URIs:

• https://mcp.example.com/mcp
• https://mcp.example.com
• https://mcp.example.com:8443
• https://mcp.example.com/server/mcp (when path component is necessary to identify individual MCP server)

Examples of invalid canonical URIs:

• mcp.example.com (missing scheme)
• https://mcp.example.com#fragment (contains fragment)

Note: While both https://mcp.example.com/ (with trailing slash) and https://mcp.example.com (without trailing slash) are technically valid absolute URIs according to RFC 3986, implementations SHOULD consistently use the form without the trailing slash for better interoperability unless the trailing slash is semantically significant for the specific resource.

For example, if accessing an MCP server at https://mcp.example.com, the authorization request would include:

&resource=https%3A%2F%2Fmcp.example.com

MCP clients MUST send this parameter regardless of whether authorization servers support it.

​

Access Token Usage

​

Token Requirements

Access token handling when making requests to MCP servers MUST conform to the requirements defined in OAuth 2.1 Section 5 “Resource Requests”. Specifically:

1. MCP client MUST use the Authorization request header field defined in OAuth 2.1 Section 5.1.1:

Authorization: Bearer <access-token>

Note that authorization MUST be included in every HTTP request from client to server, even if they are part of the same logical session.

2. Access tokens MUST NOT be included in the URI query string

Example request:

GET /mcp HTTP/1.1
Host: mcp.example.com
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

​

Token Handling

MCP servers, acting in their role as an OAuth 2.1 resource server, MUST validate access tokens as described in OAuth 2.1 Section 5.2. MCP servers MUST validate that access tokens were issued specifically for them as the intended audience, according to RFC 8707 Section 2. If validation fails, servers MUST respond according to OAuth 2.1 Section 5.3 error handling requirements. Invalid or expired tokens MUST receive a HTTP 401 response.

MCP clients MUST NOT send tokens to the MCP server other than ones issued by the MCP server’s authorization server.

Authorization servers MUST only accept tokens that are valid for use with their own resources.

MCP servers MUST NOT accept or transit any other tokens.

​

Error Handling

Servers MUST return appropriate HTTP status codes for authorization errors:

​

Security Considerations

Implementations MUST follow OAuth 2.1 security best practices as laid out in OAuth 2.1 Section 7. “Security Considerations”.

​

Token Audience Binding and Validation

RFC 8707 Resource Indicators provide critical security benefits by binding tokens to their intended audiences when the Authorization Server supports the capability. To enable current and future adoption:

• MCP clients MUST include the resource parameter in authorization and token requests as specified in the Resource Parameter Implementation section
• MCP servers MUST validate that tokens presented to them were specifically issued for their use

The Security Best Practices document outlines why token audience validation is crucial and why token passthrough is explicitly forbidden.

​

Token Theft

Attackers who obtain tokens stored by the client, or tokens cached or logged on the server can access protected resources with requests that appear legitimate to resource servers.

Clients and servers MUST implement secure token storage and follow OAuth best practices, as outlined in OAuth 2.1, Section 7.1.

Authorization servers SHOULD issue short-lived access tokens to reduce the impact of leaked tokens. For public clients, authorization servers MUST rotate refresh tokens as described in OAuth 2.1 Section 4.3.1 “Token Endpoint Extension”.

​

Communication Security

Implementations MUST follow OAuth 2.1 Section 1.5 “Communication Security”.

Specifically:

1. All authorization server endpoints MUST be served over HTTPS.
2. All redirect URIs MUST be either localhost or use HTTPS.

​

Authorization Code Protection

An attacker who has gained access to an authorization code contained in an authorization response can try to redeem the authorization code for an access token or otherwise make use of the authorization code. (Further described in OAuth 2.1 Section 7.5)

To mitigate this, MCP clients MUST implement PKCE according to OAuth 2.1 Section 7.5.2. PKCE helps prevent authorization code interception and injection attacks by requiring clients to create a secret verifier-challenge pair, ensuring that only the original requestor can exchange an authorization code for tokens.

​

Open Redirection

An attacker may craft malicious redirect URIs to direct users to phishing sites.

MCP clients MUST have redirect URIs registered with the authorization server.

Authorization servers MUST validate exact redirect URIs against pre-registered values to prevent redirection attacks.

MCP clients SHOULD use and verify state parameters in the authorization code flow and discard any results that do not include or have a mismatch with the original state.

Authorization servers MUST take precautions to prevent redirecting user agents to untrusted URI’s, following suggestions laid out in OAuth 2.1 Section 7.12.2

Authorization servers SHOULD only automatically redirect the user agent if it trusts the redirection URI. If the URI is not trusted, the authorization server MAY inform the user and rely on the user to make the correct decision.

​

Confused Deputy Problem

Attackers can exploit MCP servers acting as intermediaries to third-party APIs, leading to confused deputy vulnerabilities. By using stolen authorization codes, they can obtain access tokens without user consent.

MCP proxy servers using static client IDs MUST obtain user consent for each dynamically registered client before forwarding to third-party authorization servers (which may require additional consent).

​

Access Token Privilege Restriction

An attacker can gain unauthorized access or otherwise compromise a MCP server if the server accepts tokens issued for other resources.

This vulnerability has two critical dimensions:

1. Audience validation failures. When an MCP server doesn’t verify that tokens were specifically intended for it (for example, via the audience claim, as mentioned in RFC9068), it may accept tokens originally issued for other services. This breaks a fundamental OAuth security boundary, allowing attackers to reuse legitimate tokens across different services than intended.
2. Token passthrough. If the MCP server not only accepts tokens with incorrect audiences but also forwards these unmodified tokens to downstream services, it can potentially cause the “confused deputy” problem, where the downstream API may incorrectly trust the token as if it came from the MCP server or assume the token was validated by the upstream API. See the Token Passthrough section of the Security Best Practices guide for additional details.

MCP servers MUST validate access tokens before processing the request, ensuring the access token is issued specifically for the MCP server, and take all necessary steps to ensure no data is returned to unauthorized parties.

A MCP server MUST follow the guidelines in OAuth 2.1 - Section 5.2 to validate inbound tokens.

MCP servers MUST only accept tokens specifically intended for themselves and MUST reject tokens that do not include them in the audience claim or otherwise verify that they are the intended recipient of the token. See the Security Best Practices Token Passthrough section for details.

If the MCP server makes requests to upstream APIs, it may act as an OAuth client to them. The access token used at the upstream API is a seperate token, issued by the upstream authorization server. The MCP server MUST NOT pass through the token it received from the MCP client.

MCP clients MUST implement and use the resource parameter as defined in RFC 8707 - Resource Indicators for OAuth 2.0 to explicitly specify the target resource for which the token is being requested. This requirement aligns with the recommendation in RFC 9728 Section 7.4. This ensures that access tokens are bound to their intended resources and cannot be misused across different services.